isometric title scale date dr dwg rev the information contained in this document is propr ietary to e-switch and is not to be copied or transferred sheet of rev pcr no description date by 1003p4t6b11m1qeh 1.5 : 1 8/8/2008 ST131040 a blr 1 1 panel without locking ring with standard locking ring pos. 1 pos. 2 pos. 3 switch function off (on) (on) 2-3, 5-6, 8-9 open 2-1, 5-4, 8-7 2 1 3 note: 1. all dimensions in mm [inch] 2. general tolerance: x.x=0.4 x.xx=0.25 3. terminal numbers for ref only 4. plating material: silver 5. rating: 5a @120 vac (or 28 vdc) 2a @250 vac 6. life expectancy: 40,000 make-and-break cycles at full load. 7. insulation resistance: 1,000 mega-ohm min. 8. dielectric strength: 1,000 v rms @sea level. 9. operating temp.: -30c to 85c 10. denotes critical parameter. 11. 2002/95/ec (rohs) compliant 12. hardware to be shipped bulk t100000 - hexnut - qty 2 t100011 - lockwasher - qty 1 t100015 - lockring - qty 1 5 4 6 8 7 9 circuit: 3pdt a 18198 released for production 8/8/08 blr 3 6 9 9 8 7 pos. 1 pos. 2 pos. 3 6.10 [.240 in] .85 [.033 in] .55 [.022 in] mounting r3.18 [.125 in] n 2.38 [.094 in] n 6.35 [.250 in] keyway (on) = momentary 16.51 [.650 in] 12.70 [.500 in] 2.54 [.100 in] 5.08 [.200 in] 8.99 [.354 in] 14.50 [.571 in] 4.70 [.185 in] .76 [.030 in] 4.83 [.190 in] 1.98 x 1.19 slot e-switch logo on opposite side 1/4-40 uns-2a 3.96 [.156 in] 12.29 [.484 in] 25 epoxy seal 1.44 [.057 in] 12.06 [.475 in]
|
